Other machines http://taes.in Thu, 25 Feb 2016 00:30:16 +0000 en-US hourly 1 https://wordpress.org/?v=4.4.5 Reinforcement Punching machine http://taes.in/reinforcement-punching-machine/ http://taes.in/reinforcement-punching-machine/#respond Wed, 24 Feb 2016 00:09:16 +0000 http://taes.in/?p=209 Reinforcement Punching Machine

 Features

>Hydraulic press for locks with a fast and accurate perforation for the casing, handleand lock hole in a pipe.

>Pipe thickness can be of 2mm. No matter the material, it can either punch normalsteel, galvanized steel or stainless steel.

> The perforation of the lock hole and the handle could be combined, it means we can punch a pipe with lock and handle on both ends, as we can as well make either the handle or the lock in the other.

> Hydraulic punching system.

> Safety pedal.

> Operation time 58 secodns (approximately).

> Type of keyhole: Bombin.

> Type of material: M.S., S.S., Galvanized steel…

 

 

Technical Characteristics

 

Engine power0,75 KW / 1 HP

 

Three-phased tension230 / 400 V

 

Dimensions1500x570x1470 mm

 

Weight 200 Kg

 

Pipe thickness2mm

]]> http://taes.in/reinforcement-punching-machine/feed/ 0 Reinforcement bending machine http://taes.in/reinforcement-bending-machine/ http://taes.in/reinforcement-bending-machine/#respond Wed, 24 Feb 2016 00:02:05 +0000 http://taes.in/?p=205 ROLL FORMING MACHINE FOR MAKING REINFORCEMENT

 

TECHNICAL INFORMATION

 

Max coil width 150 mm
Max coil thickness 2,00mm
Max speed 24m/min
Working speed 1.20 thickness, length 6m speed 24m/min

 

  • Length and piece amount can be entered on PLC panel,

 

  • Operates in accordance with plastic cutting machine.

 

THE COMPLETE ROLLFORMING LINE CONSIST OF;

 

1-MECHANICAL UNCOILER

 

Max Coil weight 1,5 tons
Max Coil width 200mm
Coil inner diameter 508mm
Coil outer diameter Max 1400mm
Mandrel expansion Mechanical

 

 

 2- ROLLFORMING MAIN MACHINE

 

  • Playt : On the playt there will be 6 station. When the machine is working, sheet metal goes along on the stations and step by step it gives form to make profile.

 

2.2-     Straightening  Apparatus:  It’s an apparatus which send metal sheet band to centralized to horizontal axles.

 

2.3-     Stands:  It gives form to sheet metal step by step. Elements;

  1. Rolls : Rolls made from materials of Steel-4140
  2. Special key will be given for down-upper stand action
  3. Moulds :U profile moulds sets will be given with the machine

 

Desired  dimension U-profiles will be done without changing the moulds

 

  • Straightening Head at the roll former’s exıst (Turkısh head) : It makes profiles straight. It can move in X-Y axles
  • Gear case : Gear case give action to stands rolls. Gears  are made of

Steel- 8620 and than applicated heat treatment .Gear rolls which are at the same time moulds rolls, it’s made of  Steel-4140.

 

 

3-PLC AUTOMATIC CONTROL CABINET :

Lines will be controlled  from only one panel. 0-30 m / min speed control, regulatablelenghtand  amount of pieces of profiles are  controlled with PLC.

 

4-  HYDRAULIC CUTTING UNIT:

 

Hydraulic cutting pattern is fixed, the machine will stop when the desired length after cutting process will continue.

 

]]> http://taes.in/reinforcement-bending-machine/feed/ 0